Vibration Test System - Model 7000

Are your payloads greater than can be handled by the 1800-5? Don't need the large stroke and low-end performance offered by the 6000? The Lansmont Model 7000 vibration test system is the next actuator in the standard system line-up. The 7000 offers 2.5" (6.35 cm) of stroke, even greater payload capacities than the 1800-5 or 6000, and can be custom configured in many ways to address your particular vibration testing needs.

The Model 7000 vibration tester was designed to accommodate a wide range of table sizes, from 36" (91.4 cm) square all the way up to 60" x 60" (152 cm) square. Its 2.5" (6.35 cm) stroke, 9,172 Lb. (41 kN) stall Force actuator can handle payloads up to 2,200 Lbs. (998 Kg) without the optional One-G supports, or 3,900 Lbs. (1,769 Kg) with the One-G supports installed.

Lansmont's TouchTest Vibration Controls completely integrate all of the test hardware, operating controls, data analysis and reporting functions. The system can perform random vibration, Field-to-Lab^® simulations and direct downloads from Lansmont's SAVER field data recorder, resonance search and dwell, sine sweep and repetitive bounce, all under closed-loop computer control. All of Lansmont's standard servo-hydraulic vibration test systems include the following:

• Single control system for all operational and safety functions
• Reliable, self-contained hydraulic power supply
• Lansmont initiation and system level training
• Full range of applications training programs available
• Comprehensive one-year warranty on all components

Table Size:	98" x 60" (249cm x 152cm) - Maximum
Capacity:	2,500 lbs. (1,134 kg)
Piston Stroke:	2.5" (6.4cm)